Table of Contents
Advertisement
Programmable Device Server with I/O Expansion Slot(s)
4. Check the "Save current settings to EEPROM" and "Apply Current settings" options, and then
click the "SET COM
5. Click "Set Remote VCOM3
Setup Page (Pair-connection settings).
6. Select "Add COM" and type in the COM port of the PDS-8x1 #1 (Client) which you want to use.
Type the appropriate COM Port number, IP address and command port of the PDS-8x1 #2
(Server) settings in the relevant fields, for example "COM: 1", "IP: 10.0.8.200" and "cmd port:
10000".
7. Check the "Save to EEPROM" option and click "submit" button to update configuration.
PORT"
button to finish configuration.
connection"
to proceed to the PDS-8x1 Remote Vcom3 connection
5
7
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
4
Figure 5-3.5
Figure 5-3.6
6
- 66 -
Advertisement
Table of Contents
