Programmable Device Server with I/O Expansion Slot(s)
6.
Operating Mode Switch
Init Mode: Uses factory settings and allows the firmware to be updated
Run Mode: Firmware operation mode
For PDS-8x1 controller, the operating mode switch is set to the
order to update the firmware for the PDS-8x1 controller, the switch must be moved from the
Run
position to the
update is complete.
Init
position. The switch must be returned to the Run position after the
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Run
position by default. In
- 15 -