Command List - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.3 Command List

Section
Command
6.3.1 IPFILTER
6.3.2 IPCONF
6.3.3 SOCKET
6.3.4 COM
6.3.5 Broadcast
6.3.6 SystemTimeout
6.3.7 SocketTimeout
6.3.8 M
6.3.9 EchoCmdNo
6.3.10 EndChar
6.3.11 IP
6.3.12 MASK
6.3.13 GATEWAY
6.3.14 MAC
6.3.15 NAME
6.3.16 ALIAS
6.3.17 DHCP
6.3.18 UDP
6.3.19 VER
6.3.20 SAVE
6.3.21 LOAD
6.3.22 CONFIG
6.3.23 RESET
6.3.24 QUIT
Description
Retrieves/Sets the IP addresses that are allowed to access the PDS-8x1.
Queries the network configuration. (IP/Mask/Gateway/MAC addresses).
Lists all the status of sockets (Listen/Not Used Yet) together with the
type of each socket (TCP Server: Port No./UDP/Unused).
Queries or sets the configuration of the COM Ports (Baud Rate/Parity
/Stop Bits)
Queries or sets the Broadcast parameter, which determines whether or
not the module can receive Broadcast packets.
If PDS-8x1 has no network communications during the SystemTimeout
period, the PDS-8x1 will reboot it-self automatically.
If there is no data send/receive on the connection during the
SocketTimeout period, the PDS-8x1 will close the connection
automatically.
Gets/Sets the echo mode.
/M0: Transparent Mode, Multi-Echo, Data-Shared.
/M1: Slave Mode, Single-Echo, None-Shared.
Queries or sets the EchoCmdNo parameter that enables or disables
adding Command Number before response.
Sets a character that determines the end of a response string.
Queries or sets the IP address.
Queries or sets the subnet Mask value.
Queries or sets the Gateway address.
Queries the MAC address.
Queries the module name.
Sets the alias for a PDS-8x1.
Enables/Disables the DHCP client.
Sets whether to reply to a UDP search command.
Queries the version information
Determines whether or not backup copies of the "autoexec.bat" and
"vcom.ini" files are saved when using the "load" command.
Loads file to the built-in flash disk on PDS-8x1. It should be used to
update firmware only.
Restores the factory default settings.
Reboots the PDS-8x1 module.
Exits the running firmware.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 73 -