ICPDAS PDS-811 User Manual page 68

Programmable Device Server with I/O Expansion Slot(s)
Step 4: Configuring the Pair-connection (Server Mode) on the Web Server for PDS-8x1 #2
1. Enter the URL address of the PDS-8x1 #2 in the address bar of the browser or click the "Web"
button in the VxComm Utility to log in to the web configuration page.
2. Click the "COM Port
Port number, Baud Rate and Data Format settings from the relevant drop down options, for
example "9600", "8", "None" and 1" .
(Refer to Figure 5-3.4 for illustrations of how to perform the above step 2.)
3. Check the "Save current settings to EEPROM" and "Apply Current settings" items, and then
click the "SET COM
4. Click "Set Remote VCOM3 connection" at the PDS-8x1 #2 (Server) COM PORT setup page.
(Refer to Figure 5-3.5 for illustrations of how to perform the steps 3 and 4.)
5. Confirm that the Local COM port/Remote COM port area of the PDS-8x1#2 (Server) is "None".
Settings" tag to enter the settings page, and select the appropriate COM
PORT" button to finish configuration.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Figure 5-3.9
- 68 -