Auto-On Indicator; Pressure Reading - Varian XGS-600 Instruction Manual

Sensor ID's

Auto-On Indicator

Pressure Reading

3-4
XGS-600 Gauge Controller
Lists the five-character User Label configured on the "Sensor Setup
Screen" on page 3-9.
Indicates Auto-On has been set up, using the Sensor Setup screen,
between a convection and an ion gauge(s). The same symbol
appears next to both the convection and the ion gauge showing the
link between the two.
In the screen shown, convection gauge CNV2 has been set up to
trigger both ion gauges HFIG1 and HFIG2.
Multiple Auto-ON setups are possible, with a different symbol
shape for each Convection gauge.
See "Sensor Setup Screen" on page 3-9 for Auto-ON details.
Displays the gauge pressure reading. The pressure units, as selected
in the System Setup screen, appear at the top of the column:
❑
Convection gauge readings always appear, as they are
always on.
❑
For ion gauges,
on, until the software determines a valid reading.
See Table 4-1 on page 4-5 for error messages displayed in this
column.
If an ion gauge error message appears in the pressure reading
column and the control column indicates OFF, clear the error as
follows:
1. Press OK or reselect OFF in the control column.
2. Scroll to ON option to turn the gauge on.
- - -
appears when a gauge is first turned