Ba Cross Reference - Varian XGS-600 Instruction Manual

Controller Gauge Card
C H
✔
✔
✔

BA Cross Reference

The XGS-600 controller is compatible with many competitor gauges. Table 2-3 indicates
which Varian gauge setting should be used for each of these gauges. See "Sensor Setup
Screen" on page 3-9.
GP
Select Sensor model 572 for the following:
274012 4336-TP/1
274013 4336-TP
274015 4336-TK
274016 4336-TK/1
274017
274018
274021
2-4
XGS-600 Gauge Controller
Table 2-2 Gauge Selection Chart (Continued)
Gauge
Type Recommendation
M
IMG-300 Most durable and fastest
Inverted responding UHV gauge
Magnetron (cold cathode)
UHV-24 Most popular UHV gauge
(nude) (hot filament)
UHV gauge providing the
UHV-24p
(nude)
highest vacuum reading
Table 2-3 BA Cross Reference
ETI MDC
Gauge Characteristics
• Measures to 1 x 10
• Bakeable with magnet to 250 °C
• Bakeable without magnet to 450 °C
• Reliable, rugged, will not burn out
• Can be cleaned
• Measures to 1 x 10
• Bakeable with magnet to 250 °C
• Thoriated iridium filaments run cooler - less outgassing
• Dual tungsten filaments run hotter -
More outgassing but measurements are more accurate
and repeatable
• Same as UHV-24 except it measures to 2 x 10
Huntington Kurt Lesker
TP-100 G100TF
TK-100 G075TK
TK-100-F
-11
Torr
-10
Torr
-11
Duniway
T-075-N
T-075-P
T-075-K
T-100-N
T-100-K
T-100-P
T-CFF-133
T-CFF-275
T-KF25
T-KF40
Torr