Main Screen; Soft Keys - Varian XGS-600 Instruction Manual

Main Screen

Figure 3-2 shows the main screen, which appears at power up.
Use this screen to:
❑
View a list of installed sensors.
❑
View real-time pressure readings and status by sensor.
❑
Turn an ion gauge on/off or calibrate a Convection gauge.
❑
View the setpoint status.
Sensor ID's

Soft Keys

SETPTS
SETUP
LARGER
XGS-600 Gauge Controller
NOTE
The sequence of gauge rows follows the board installation
sequence from left to right (when viewed from the front).
Auto-On Indicator
Figure 3-2 Main Screen
Select to open the Set Point screen (page 3-7).
Select to open the Sensor Setup screen (page 3-9) and other setup
screens.
Select to open the Large Font screen (page 3-16).
NOTE
The NEXT key appears if there are more than eight gauges. Use this
key to move to the next Main screen with the additional gauges.
Pressure Readings
Soft keys
3-3