Panel mount
The panel mounting kit includes the following:
•
6 mounting clamps
1. Select a place on the panel (or wall) where you will mount the system.
2. Cut out a shape on the panel that corresponds to the system's rear di-
mensions (272mm x 169mm) and ensure that the system can be fitted
into the panel properly.
5
Mounting hole
Panel
3. Insert the system from the outside surface of the panel into the mount-
ing hole until it is properly fitted against the panel.
4. Position the mounting clamps along the rear edges of the system and
insert them into the slits around the system.
www.dfi.com
210.50
272
8