Call Completion - VTech ErisTerminal ET635 User Manual

ET635 User Manual
• Forwarding incoming calls when they are not answered:
1. Open Identity (1-12) page > Features tab > Call Forwarding > Timeout.
2. Type the number of seconds into the text field of "Timeout (sec)". If an incoming call hasn't been
answered when the time has elapsed, the call will be forwarded to the phone number entered as
target.
3. Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by
the phone, without spaces or punctuation between the digits.
4. Click Apply and click Save.
Turning call forwarding on
1. Web interface > Identity (1-12) page > Features tab > Call Forwarding.
2. Click "On" after the forwarding event (Always, Busy, Timeout).
3. Click Apply and click Save.
Turning call forwarding off
1. Web interface > Identity (1-12) page > Features tab > Call Forwarding.
2. Click on "Off" after the forwarding event (Always, Busy, Timeout).
3. Click Apply and click Save.
C
all completion
On VTech phones, call completion means that when a called number is busy or not available, your phone will
call you back as soon as the dialed number is not busy anymore or available again. The factory default setting is
"off". For more information, see "Call completion" on page 58.
Note: This function must be supported by your VoIP provider and/or your PBX.
On the phone
1. Press and select Call Features > Outgoing Calls > Call Completion.
2. Press to switch setting between On
3. Press briefly to return to the previous menu, or press
On the web interface
Open the phone's web interface > Advanced Settings page > Behavior tab > Phone Behavior section > Call
Completion: Click the radio button on.
and Off .
for two seconds to return to the idle screen.
97
Customizing the Phone Settings