Table of Contents
Advertisement
ET635 User Manual
Turn "do not disturb" (DND) mode on and off for all identities registered on the phone
(Fig. 1). If you want to turn on DND for one or more, but not all of the identities (Fig. 2), use
the Identity settings on the phone's web user interface. In DND mode, incoming calls do not
ring; callers hear the busy signal.
Exception: Phone numbers on your directory's VIP list (see "Contact Types" on page 46).
When DND is on, you'll see the DND symbol on the display.
Fig.1 - DND active
Audio Control Keys
Press the right or left edge of the key to adjust the volume
•
of the ringer when the phone is idle or ringing
•
of the loudspeaker in handset, casing, or headset, respectively, when in call
Muting and unmuting the microphone
•
Toggling between handsfree and handset mode
•
Dialing numbers on speakerphone
•
Accepting calls on speakersphone
Toggling between headset and handset modes.
Note: Handset mode overrides headset mode. When the handset is picked up, the
headset symbol in the status line will be replaced by the handset symbol, indicating that
you can now use only the handset for the call. To return audio to the headset, press
again. The headset symbol will reappear in the status line. You can then place the handset
in the cradle without ending the call.
Page toggle key
Page toggle key for the freely programmable SmartLabel LED function keys displayed on the
phone screen. Press the key to display the next "page" of four key label "pages" on screen.
Freely programmable SmartLabel function keys P1-P32 with LEDs
These 4 x 8 = 32 freely programmable function keys can be programmed and labeled on the phone and on the
Function Keys page of the phone's web interface. For information on how to map functions onto these keys,
see "Configuring the function keys" on page 75. The factory default setting is line.
Fig. 2 - DND active for one of the configured identities
25
Getting to Know Your Phone
Advertisement
Table of Contents
