Call Forwarding - VTech ErisTerminal ET635 User Manual

ET635 User Manual
C
all forwarding
The phone can be set to forward incoming calls, either always or under certain conditions. The settings can
be done on the phone and on the web interface. For further information on using the web interface for these
settings, see "Call forwarding" on page 96.
Note Call forwarding is set for each configured identity separately. When the setting is done on
the phone, it applies to the identity selected as outgoing identity.
Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox specified as this
function's target.
Forwarding all calls is off
In the default setting, the symbol
forwarding of all calls on and off, respectively, by pressing the function key underneath the symbol, but you can
also map the function onto another function key or use the settings menu as shown in the table below.
Forward when Busy: Forwarding calls ringing while the phone is busy to the number of the phone, extension or
mailbox specified as this function's target. Note: Forward when Busy will only work if Call Waiting is turned off.
Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds specified in
the setting "Call forwarding time". If the call is not accepted by the end of this time period, it is forwarded to
the number of the phone, extension, or mailbox specified as this function's target.
All incoming calls are forwarded
/ is available in the function key line and can be used to turn
72
Using the Phone