ET635 User Manual
◦
LP Feature (functionality for long-pressing key)
This is a shortcut to the configuration menu of each freely programmable SmartLabel key with LED
(keys P1–32). In the default setting, the function is enabled (Fig. 1).
If necessary, use the toggle
seconds to open its configuration menu. The yellow LED on the key blinks. See "Settings on the phone"
on page 77, steps 4–7, on how to continue.
Note: The LP feature must be deactivated for the functions Push2Talk and Line Info Layer.
If the LP feature of a key has been disabled, use the Preferences menu to access the key's
configuration menu. See "Settings on the phone" on page 77.
Fig. 1
P
rogramming the function keys
The freely programmable function keys on the phone and on all connected expansion modules can be mapped
on the phone and on the phone's web interface. We recommend using the web interface which is faster and
more comfortable.
Settings on the phone
On the phone, a limited number of functionalities is available.
1. Press
> Preferences > Fkeys (Fig. 1).
Fig. 1
2. Press
to select SmartLabel Keys (Fig. 2).
to select Line keys page 1, 2, 3, or 4, respectively, and press
3. Press
4. Press
to select a key and press
to select the page the key is on, and then press the key
Fig. 2
Fig. 2
(Fig. 4). The default setting is "Line".
Fig. 3
(Fig. 3).
77
Configuring the Function Keys
for three
Fig. 4