Appendix 2 - Status Messages - VTech ErisTerminal ET635 User Manual

ET635 User Manual
A
ppendix 2 - Status Messages
Whenever there is a current message concerning the status of the phone, the function key
function key or, if it not available,
status messages will also be displayed on the display; if there is more than one current message, the one with the highest
priority will be shown. The messages in descending order of priority:
Status message
SW 1
Reboot required 1
SIP disabled 1,²
Error 1
Low memory 1
Remote directory is too big 1
Not Registered: <account> 1,²
Waiting for <name/number> to be
available ²
<account> is now available ²
Forward when Busy: <name/number>
Forward after Timeout: <name/number>
Forward all: <name/number> ²
Contacting NTP server
NTP server unreachable 1
HTTP Password not set 1
Admin Password not set 1
Keyboard locked ²
DND active ²
You have messages
You have new messages
Old messages
Missed: <number>
1 The function key symbol
² The message cannot be deleted from the "Status Info" screen
> Information > Status Info) to open the Status info screen. Additionally, some
Definition
A firmware update is available
Reboot required, for example to have settings changes take
effect
The phone cannot make calls due to license problems
An error occurred
Disk space full
The remote directory is too big to be imported
The specified identity/account is not registered
Waiting for call completion to busy or currently unavailable
number
The dialed number is not busy anymore or is now available
Call forwarding is on. When your phone is busy, incoming calls
will be forwarded to the phone number indicated
Call forwarding is on. When an incoming call is not picked up
within the set number of seconds, the call will be forwarded to
the phone number indicated
Forwarding of all incoming calls is on. All incoming calls will be
forwarded to the phone number indicated.
Network Time Protocol (NTP) is a protocol for synchronizing
clocks over data network. If the connection is interrupted, the
phone will not be able to display the correct time.
No HTTP password has been set
No Admin password has been set
Only numbers designated as emergency numbers can be dialled
Do not Disturb mode is activated
There are spoken messages on the mailbox
New (messages on the mailbox)
Old (messages on the mailbox)
The number of calls you missed since the last time you checked
the list of missed calls or turned off the missed call indication
will blink
111
Appendix 2
will be available. Press the