Table of Contents
Advertisement
ET635 User Manual
You can now:
◦
transfer the held call blindly or with prior announcement - see "Transferring calls" on page 65.
◦
receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing
the call is terminated on your phone as well and the LED indicators are turned off.
Holding multiple calls
If you are in a call with one party and have one or more calls on hold, or if there is more than one call on hold,
the symbol
is available in the function key line. You can switch back and forth between the active call and
any call on hold. Up to 12 simultaneous calls are possible, if supported by the PBX.
•
In Fig. 1 and 2, the phone is in one active call with a second call on hold. Press the function key underneath
/
to show the call not currently on screen.
Fig. 1
•
In Fig. 3 and 4 there are two calls are on hold. Press the function keys underneath
the call not currently on screen.
1/2
(
)
Fig. 3
•
When the connected call is on-screen, you can transfer it to a third party by pressing
pressing .
•
When a held call is on-screen, press
Fig. 2
2/2
(
)
Fig. 4
to connect to it and put the currently connected call on hold.
63
again. If the other party hangs up while on hold,
Using the Phone
/
to show
or terminate it by
Advertisement
Table of Contents
