Table of Contents
Advertisement
ET635 User Manual
D
isplay option for SmartLabel keys
A number of settings control the appearance of the the SmartLabels on the display; they can be set on the
phone and on the phone's web interface. There are separate settings for the idle screen, call screens, and other
screens. Settings:
◦
Default display mode and Alternative display mode. The display will revert to the default mode after
the number of seconds set in Back to default display mode have elapsed. The factory defaults are
Short label for the Default display mode, and Full label for the Alternative display mode. You can also
turn either one or both of them off.
Short label
◦
Alternative display trigger. This setting defines how the appearance of the Smart Labels is switched
from the default to the alternative appearance. The default setting is Proximity sensor; moving your
hand or an object across the proximity sensor (see "At a glance" on page 21) triggers the switch.
Return/Reset to default mode timer after (sec.). This setting defines after how many seconds the
◦
appearance of the SmartLabels will automatically return to the default. Valid values are 0 to 360
seconds, the default is 3 seconds. Selecting 0 turns automatic reversion off.
Manually returning the display mode to the default: Press . Pressing any other key will work, too,
but please remember that they will also trigger their functions, i.e., pressing a number key will open the
dial screen, pressing
◦
Return to label page 1 after (sec)/Return to first page. This setting defines after how many seconds the
key page shown on the display, if other than page 1, will automatically return to the first page.
Valid values are 0 to 1209600 seconds; the default is 0.
Settings on the phone
Display mode settings
1. Press
and select Preferences.
2. Select Display and press .
3. Use the navigation key
Full label
will open the phonebook, etc.
/
to select SmartLabel Options and press .
Label off
84
Configuring the Function Keys
Advertisement
Table of Contents
