Table of Contents
Advertisement
ET635 User Manual
◦
Alternative Display Trigger.
a. Use the navigation key
following example, the trigger is currently set to Long Press Page Key (Fig. 7), as indicated by the
radio button radio button
Fig. 7
b. Use the navigation key
c. Press
to save and return to the Screen Behavior menu where the line underneath Alternative
Display Trigger now reads Proximity Sensor (Fig. 10).
Fig. 10
6. Press
to return to the SmartLabel Options menu (Fig. 2).
Timer setting for returning display mode to default
1. Press
and select Preferences > Display > SmartLabel Options.
2. Use the navigation key
The preset default is 3 seconds.
Fig. 11
3. Enter a different number of seconds between 0 and 360 (Fig. 12) on the alphanumeric keypad and press
to save and return to the SmartLabel Options menu (Fig. 13). The timer now shows the new setting.
Note: If you enter 0 seconds, the display will not return to the default mode automatically.
/
to select Alternative Display Trigger (Fig. 7) and press . In the
(Fig. 8), and we want to change it to Proximity Sensor.
Fig. 8
/
to select Proximity Sensor (Fig. 9).
/
to select Return to Default Mode Timer (Fig. 11) and press .
Fig. 12
Fig. 9
Fig. 13
86
Configuring the Function Keys
Advertisement
Table of Contents
