Table of Contents
Advertisement
ET635 User Manual
4. Click on Apply and Save.
Adjusting display settings for connected ET6 expansion modules
The intensity of the displays' backlight and the font size of the function key labels is adjusted separately for the
phone and the connected ET6 expansion modules. Lowering backlight intensity lowers the energy consumption
of the devices. You can also switch from the default line layout of the labels to tile layout. For more information
about the module's display layout, please refer to the ET6 User Guide.
Note: The number of seconds after which the ET6 expansion modules will switch from activity
to idle backlight is the number set for the primary display's backlight (see "Adjusting the
backlight on the phone's display" on page 35).
•
Appearance.
◦
Layout. The available options are line or tile layout. Line layout is the default. The layout is adjusted
separately for each module, and only connected modules appear in the menu. If there is more than
one, the first ET6 in the daisy-chain is listed as "Expansion Module 1", the second one as "Expansion
Module 2", and the third one as "Expansion Module 3".
1. Press
.
2. With Preferences selected, press .
3. Press
to select Display and press .
4. Press
to select Expansion Modules and press .
5. Press
to select Appearance and press .
6. Press
/
7. Press
to change and save the display layout of the selected ET6 expansion module, respectively,
from lines to tiles and vice versa .
to select Expansion Module 1, 2, or 3 and press .
Line layout
Tile layout
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
17
9
18
1
2
3
4
1
5
6
2
7
3
8
4
5
9
6
7
8
36
9
Getting to Know Your Phone
10
11
12
13
10
14
15
11
16
12
17
13
14
18
15
16
17
18
Advertisement
Table of Contents
