Table of Contents
Advertisement
ET635 User Manual
U
ser mode/administrator mode
VTech phones can be operated in administrator or user mode. In administrator mode, all settings are accessible
and can be modified; in user mode, a number of settings are not accessible. The factory default is administrator
mode.
When the phone is running in user mode, the administrator password is required to switch to administrator
mode. The default administrator password is 0000 (4 x zero). We recommend that you change the password for
security reasons.
Note: Do not forget the new password; without it, a TFTP reset to factory values is necessary to
return the phone to administrator mode.
If your phone is administered centrally, user mode may be the rule. Please check with your
administrator.
User mode on the phone
The "Network" menu and various other settings are inaccessible in user mode. See "Settings" on page 32.
To switch to administrator mode:
1. Press
.
2. Press
/
to select Maintenance and press .
3. With Security selected, press .
4. With Administrator Mode (which is set to "off") selected, press .
5. Enter the Admin Mode Password and press
The Security menu appears with the Administrator Mode changed to "on".
6. Press
for two seconds to return to the idle screen.
43
Getting to Know Your Phone
Advertisement
Table of Contents
