Table of Contents
Advertisement
ET635 User Manual
When a call is waiting, you have the following options:
•
Press the blinking line key of the call waiting to put your current call on hold and to accept the second call
without knowing who is calling (Fig. 3). This option is available only when there is a free line key available at
the time the call comes in.
•
Press
to reject the call waiting. The caller will hear the busy signal.
•
Press
to accept the second call and put your current call on hold.
•
Press
to return to the Connected screen with your current connection.
Note: Pressing
Fig. 1 and 3, the call waiting in Fig. 2 and 5, or the call on hold in Fig. 4.
•
If there is more than one call waiting (Fig. 5 and 6), press the keys
to bring them on-screen and to return to the connected call.
•
If you do not wish to accept the waiting call, you can:
◦
ignore the announcement. If you have set call forwarding when busy, the call will be transferred to that
phone.
◦
reject the incoming call by putting the Call waiting screen on the display and pressing .
The caller hears the busy signal. Pressing
of the phone's directory. Future calls from this number will not ring on the phone; the caller hears the
busy signal. For more information on the "Deny" list and how to remove entries from it, see "Contact
Types" on page 46.
A
ctive calls
Hold
One call on hold
Press
to put the ongoing call on hold. Held calls are indicated threefold:
◦
By the text on the display.
◦
By the slowly blinking line key.
◦
By the slowly blinking call indication LED.
and
will affect the call shown on the display, i.e., your current connection in
for three seconds will also put the caller on the "Deny" list
62
Using the Phone
,
, and
, respectively,
Advertisement
Table of Contents
