Table of Contents
Advertisement
ET635 User Manual
Automatically
There are four options for rejecting incoming calls automatically or to have them forwarded automatically,
either always or under certain conditions:
•
Deny List. Calls from phone numbers on this list will not ring on your phone; callers will hear the busy signal.
For further information, see "Contact Types" on page 46.
•
DND - do not disturb mode
when busy; if there is no setting for call forwarding, callers will hear the busy signal. For more information,
see "Preprogrammed, variably programmable function keys" on page 24.
Exception: Phone numbers designated VIP in your phone's directory will ring on your phone even when
DND is on.
•
Call forwarding. For further information, see "Call forwarding" on page 72 and 96.
•
Rejecting anonymous calls: See next section.
Rejecting anonymous calls
With this setting, you can have your phone reject calls from phones that are blocking or not transmitting their
numbers.
Please note: Calls from analog phone connections without caller ID will, most likely, be received
as anonymous calls. They will be rejected when you turn this function on.
Activating rejection of anonymous calls
1. Press
.
2. Press
to select Call Features and press .
3. Press
to select Incoming Calls and press .
4. Press
to select Reject anonymous. The default setting is off
5. Press
to change the setting to on
Fig. 1
6. Press
for two seconds to return to the idle screen.
. All incoming calls will be forwarded to the number set in call forwarding
(Fig. 2). (When the function is active, pressing
Fig. 2
71
Using the Phone
(Fig. 1).
will turn it off.)
Advertisement
Table of Contents
