Run The System Id Configuration Utility - Digital Equipment 3100R Series Service Maintenance Manual

Processor Module Upgrades

Run the System ID Configuration Utility

If you upgraded the server with a new processor type (Pentium Pro to Pentium II) or
increased the cache size, you need to run the System ID utility to store the new
model in the server memory. To run the SIDUTIL:
1. Install the BIOS diskette in the system and boot the server.
2. Select item "2. Exit."
3. At the A:\ > prompt, type SIDUTIL
The
System ID Configuration Utility
The description of the System ID information currently on the main logic board will be
displayed on the first line in the following format:
Example:
DIGITAL Server 3105 1200 R
where 3105 1200 R is the model name, FR-R2C5W-AA is the part number, and
the remaining text is a description.
4. Use the Page up/Page down arrow keys to highlight the correct system model
name/part number/description for this system. If installing an upgrade kit, match
the processor type and cache size with the line items displayed to select the new
DIGITAL Server model.
5. After selecting the correct string, press Enter. A new System ID will be stored in
the main logic board memory. The changed model name and part numbers will
be displayed at the top of the menu in the current field.
6. To exit the utility, press Escape.
6-22
main menu is displayed.
FR-R2C5W-AA 6266/512 (PII)- MODEL 1