Obtaining Information Using The Scu; Obtaining Information Using Server Management Software - Digital Equipment 3100R Series Service Maintenance Manual

Troubleshooting

Obtaining Information Using the SCU

Use the SCU to check the Serial number, Revision number, and Asset number for
the main logic board and Pentium Pro or Pentium II processor configured in the
server. For example, if you change the main logic board or processor module in the
server, you must run the SCU to re-synchronize the System ID (server model
number and serial number) in the main logic board or processor module's memory.
The SCU will check the new main logic board or processor module and detect the
System ID mismatch.
View the details for the main logic board or processor module by selecting either the
main logic board or processor module. Once selected, the Serial number, Revision
number, and Asset number display. The SCU then lists the server model number
and server serial number information stored on the main logic board or processor
module. Confirm the correct model number and serial number. This data is available
on the label located on the server back panel.

Obtaining Information Using Server Management Software

The DIGITAL server is shipped with the DIGITAL ServerWORKS Manager software.
ServerWORKS Manager is a workgroup and server management product for
DIGITAL's family of servers. ServerWORKS Manager uses the Simple Network
Management Protocol (SNMP) environment to assist the Network or Server
administrator by constantly monitoring the network for problems.
DIGITAL ServerWORKS Manager is based on an open architecture that enables
seamless integration and interoperability with popular enterprise management
software packages such as Computer Associates' Unicenter2 TNG, Hewlett-
Packard's OpenView UX for Windows, and IBM's Netview/6000 AIX. Also included
with ServerWORKS Manager are Network Operating System (NOS) Agents for
Windows NT V3.51 and V4.0, Novell NetWare™ V3.12 and V4.x, and SCO UNIX
V5.0. The OS/2 NOS includes its own agent and can also be managed from
ServerWORKS Manager.
4-8