Server Software And Utilities; Introduction - Digital Equipment 3100R Series Service Maintenance Manual

Introduction

This chapter describes the utilities supplied with the server. Server utilities include:
• ServerWORKS Quick Launch  This software is used to install a network
operating system onto the server. The CD-ROM also contains various
drivers and on-line documentation.
• System Configuration Utility (SCU)  This utility is available to configure the
server when relocating, adding, or removing EISA/ISA/PCI expansion
boards and when changing the server's factory-defined settings. The SCU is
available on the Quick Launch CD-ROM.
• RAID Configuration Utility  This utility is available for RAID-ready servers
only. This utility is available to configure the RAID array. The RAID
configuration utility is available on the Quick Launch CD-ROM.
• BIOS Upgrade Utility  This utility is available to update or restore the
server's BIOS. The BIOS Upgrade Utility is available on the Internet.
• SCSI Select Utility  This utility allows you to configure and view settings of
the onboard SCSI controller and SCSI devices. The SCSI Select Utility is
available each time you boot the server.
• Diagnostics  This utility is used to verify server operation. The diagnostics
utility is available on the Quick Launch CD-ROM.

Server Software and Utilities

2
2
2-1