FRU Replacement
Removing and Replacing the Diskette Drive
1. Turn off
2. Remove the front bezel.
3. Remove the two screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Disconnect the power and data cables from the diskette drive.
7. Remove the screws securing the diskette drive tray (and attached diskette
drive) to the drive bay cage below.
8. Slide the diskette drive tray and diskette drive backwards until they clear the
front bezel opening and then lift them away from the chassis.
9. Remove the four screws which secure the diskette drive to the drive tray.
10. Replace the diskette drive by performing the removal steps in reverse order.
5-48
.
the server