Upgrading To A Dual Processor Configuration - Digital Equipment 3100R Series Service Maintenance Manual

Upgrading to a Dual Processor Configuration

To upgrade from a single-processor configuration to a dual-processor configuration:
1. Power down the server.
2. Remove the front bezel.
3. Remove the two screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Place the antistatic wrist strap on your wrist and connect the grounding clip
to a non-painted metal surface of the server's chassis.
7. Loosen the thumbscrew and then remove the retainer and Pentium II
processor module (A, Figure 6-8).
Processor Module Upgrades
6-15