Using The Scu - Digital Equipment 3100R Series Service Maintenance Manual

Using the SCU

To use the SCU:
1. Turn on the server and allow the Power-On Self Test (POST) to complete.
If POST detects an error refer to Chapter 4, "Troubleshooting," and take the
appropriate steps to correct the problem. After the problem has been
resolved, restart the server.
2. Start the SCU using one of the three methods described previously.
3. Press [Enter] to display the SCU introductory screen.
NOTE: The SCU contains help pop-up screens for any
selected menu item. Press [F1] at anytime to display a help
screen. Press [Esc] to remove a help screen.
4. If no configuration errors appear, the Welcome screen displays.
Press [Enter] to display the Main menu.
If a configuration error appears, the Welcome screen displays information
about the error and then prompts you to reconfigure the server.
5. Step through the menu items to familiarize yourself with the SCU.
Server Software and Utilities
2-7