Boot Options Group
Menu Fields
Boot option
Boot sequence
preference
POST errors
Diskette check
Summary
screen
(1)
Factory default setting
Settings
A: then C: (1)
C: then A:
C: only
A: only
Embedded PCI
SCSI (1)
PCI slots
Enabled (1)
Disabled
Enabled (1)
Disabled
Enabled (1)
Disabled
Comments
Each time the server boots, it will load the
operating system from the sequence selected.
Select the channel that the boot device will be
attached to. If the boot device is attached to
a PCI expansion board, select the PCI slots
option and the server will boot from the first
boot device found attached to a PCI
expansion board as it scans the PCI bus.
If enabled, the server pauses and displays
POST errors. To continue, Press <F1>.
Enabling this option forces the server to verify
the diskette type during boot.
Enables or disables the ability to display the
server's configuration during boot.
SCU Features
3-5