FRU Replacement
Removing and Replacing the CD-ROM Drive
1. Turn off
2. Remove the front bezel.
3. Remove the two screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Disconnect the power and data cables from the CD-ROM.
7. Remove the two screws alongside the diskette drive which secure the CD-
ROM drive to the top of the drive bay.
8. Slide the CD-ROM forward until it clears the drive bay opening and then lift it
away from the chassis.
9. Remove the two screws securing the CD-ROM to the drive tray beneath it.
10. Replace the CD-ROM drive by performing the removal steps in reverse
order.
5-50
.
the server