Removing And Replacing The Speaker - Digital Equipment 3100R Series Service Maintenance Manual

FRU Replacement

Removing and Replacing the Speaker

1. Turn off the server.
2. Remove the front bezel.
3. Remove the two screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Disconnect the speaker cable from the main logic board.
7. Gently pry the speaker away from the top speaker tab and then lift if straight
up from the chassis.
8. Replace the speaker by performing the removal steps in reverse order.
5-54