Software Updates; Software Update - Barco ClickShare CSE-800 Installation Manual

7. SOFTWARE UPDATES

7.1

Software update

About Software updates
There are two ways to update the Base Unit software:
• via the Configurator, for more information, see "Firmware Update", page 70.
• by copying the software on a USB stick
To update the Base Unit software by copying the software on a USB stick
1. Download the latest version of the software from Barco's website, , www.barco.com/clickshare. Click on Visit the ClickShare
product page and go to tab Downloads
2. Unzip the zip file.
3. Copy the ENC file to a USB stick.
You can have multiple firmwares for multiple device types on the same stick.
4. Insert the USB stick into the USB port at the front of the Base Unit.
5. Follow the instructions on the meeting room screen.
6. When the on-screen message indicates that the process is finished, remove the USB stick.
The Base Unit reboots.
R5900049 CLICKSHARE CSE-800 19/03/2018
7. Software updates
73