2. CSE-800 Specifications
1
2x USB port 3.0
2
Standby button
Table 2-2
USB ports
The USB ports (front or back) are used to update the soft- and firmware of both the Base Unit and the Buttons. To pair the buttons,
connect the touchscreen and saving blackboarding/annotation screen to USB stick
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the Button's
software and firmware are up to date. If not, the Base Unit updates the software and/or firmware.
To update the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick
and plug it into the USB port of the Base Unit. Follow the progress and instructions on the display.
Status LED
The color of the LED at the front of the Base Unit give information on the status of the system.
LEDs behavior
static red
blinking white
breathing white
static white
red blinking
dark
Standby button
The button at the front of the Base Unit has a standby function once the Base unit is powered
•
When the system is in normal operational mode, a push makes the system goes to a pre-defined standby mode.
•
When the system is in a standby mode, a push triggers the system to start up and to go to normal operational mode.
Back layout of the Base Unit
The connection panel is situated at the back of the Base unit.
2. touchscreen connection, blackboarding/annotation screen saving will be available in future releases
8
Explanation
•
receiving content from the Buttons and streaming towards the display.
•
pairing and software update of the Button is done. You can now unplug the
Button from the Base Unit.
•
during the first phase of the Base Unit boot process.
•
system is starting up (during the second phase)
•
Button pairing is in progress
•
software update of the Base Unit
•
ECO standby mode
•
awake and ready (i.e. showing the welcome message on the display)
•
pairing is done
•
an error occurred
•
deep standby/off
2
.
R5900049 CLICKSHARE CSE-800 19/03/2018