Security, Passwords - Barco ClickShare CSE-800 Installation Manual

6. CSE-800 Configurator
To reset your individual changes, select the desired security level and click Save changes.
Changing the security level will require a repairing of the Buttons.
Changing the security level from 1 to a higher level will change the compatibility setting for Buttons with
certificate (R9861006D01). They cannot re-pair as long as the security setting is higher than level 1.
How to set the security level
1. Log in to the Configurator.
2. Click Security → Security Level.
Image 6-41
Security levels
3. Select the desired security level icon.
4. Click Save changes to apply the setting.

6.23 Security, passwords

About passwords
To access the Configurator (WebUI) a user name and password is needed. That password can be changed at any time to protect
the ClickShare Configuration settings.
The ClickShare API access is password protected. That password can be changed in the configurator.
Changing the WebUI password
1. Log in to the Configurator.
2. Click Security → Passwords.
60 R5900049 CLICKSHARE CSE-800 19/03/2018