Audio Settings - Barco ClickShare CSE-800 Installation Manual

6. CSE-800 Configurator
Screen saver setup
1. Log in to the Configurator.
2. Click Display & Audio → Outputs.
3. To activate the screen saver, drag the slider bar to the left or to the right until the desired delay time is reached.
When the slider is set completely to the right, the screen saver will never be activated.
4. Click on Save changes to apply the new settings.
6.9

Audio settings

About the audio settings
The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the Buttons must be re-paired
before the setting becomes active.
How to change
1. Log in to the Configurator.
2. Click Display & Audio → Display & Audio → Output.
Image 6-19
Audio settings
3. Check or uncheck the check box next to Enable Audio.
Checked: audio is enabled.
Unchecked: audio is disabled.
4. To select the audio output, click on the drop down box and select the desired audio output.
Jack: audio output via jack.
HDMI: audio output via HDMI.
SPDIF: digital audio ouput via TOSLINK
5. Click on Save changes to apply the new settings.
42 R5900049 CLICKSHARE CSE-800 19/03/2018