Barco ClickShare CSE-800 Installation Manual page 27

1
Image 2-5
Button layout
1 USB connector
2 Button
3 LED ring
Table 2-5
USB connector
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or the Base Unit (for pairing the Button
to the Base Unit or updating its software).
The Button can be used with USB-C ports with the use of a convertor.
Button
Click the Button to display the content of the laptop's screen on the meeting room display. Clicking the Button during the meeting
will toggle the sharing of the screen.
LED ring
The LED ring indicates the current status of your ClickShare.
LEDs behavior
white blinking
static white
static red
red blinking
off (no light)
Button label
The label at the bottom of the Button contains:
• the Barco logo
• the Barco part number
• the serial number
• the revision number
• markings for applicable standards
• markings for waste regulation
• "Made in..."
R5900049 CLICKSHARE CSE-800 19/03/2018
2 3
Explanation
• the Button is plugged in the laptop and initializing or waiting for the user
to start the ClickShare application.
• pairing/software update of the Button in the Base Unit is in progress.
• ClickShare is ready to start sharing your screen.
• pairing is done. You can now unplug the Button from the Base Unit.
• sharing your screen with the display.
• pairing and software update is done. You can now unplug the Button
from the Base Unit.
• an error occurred.
• the Button is not or not properly inserted into the USB port.
• the Button might be defective.
• the USB port or computer might be defective.
2. CSE-800 Specifications
11