Barco ClickShare CSE-800 Installation Manual page 62

6. CSE-800 Configurator
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrally and automate the assignment of IP addresses in an organization's network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address
must be entered manually at each computer and, if computers move to another location in another part of the network,
a new IP address must be entered. DHCP lets a network administrator supervise and distribute IP addresses from
a central point and automatically sends a new IP address when a computer is plugged into a different place in the
network.
Hostname
1. Log in to the Configurator.
2. Click Wi-Fi & Network → LAN Settings.
Image 6-23
LAN settings
3. Click in the input field next to Hostname and enter a host name for the Base Unit.
The default host name is ClickShare-<serial number Base Unit>.
4. Click Save changes to apply the settings.
Setup the primary and secondary interface
1. To select the method, click on the drop down box next to Method and select the Automatic (DHCP) or Manual.
When Automatic (DHCP) is selected, the IP address, subnet mask and default gateway fields are grayed out but the currently
used settings are filled out.
For manual setup, see "Manual (fixed) IP address".
Manual (fixed) IP address
1. Click on the drop down box next to Method and select Manual.
The IP address, subnet and gateway input fields are activated.
The default IP addresses are filled out.
For the primary interface: "192.168.0.23" . For the secondary interface: "192.168.1.23". Both with subnet mask "255.255.255.0".
2. Click in the input field of the IP address and fill out the 4 octets.
Note: An address contains 4 octets with a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-Address assignment
3. Click in the Subnet mask input fields and fill out the 4 octets as appropriate for the local subnet.
46 R5900049 CLICKSHARE CSE-800 19/03/2018