Barco ClickShare CSE-800 Installation Manual page 69

2. Click WiFi & Network → Network integration. Click on Change configuraton.
3. Select the radio button next to EAP-TTLS and click Next.
Image 6-31
Network integration, EAP-TTLS selected
The EAP-TTLS mode window opens.
Image 6-32
Necessary Data to continue:
Domain
Identity
Password
Corporate SSID
Click Next to continue.
When having problems connecting the Button to your corporate network, to get feedback from the Button please have a look
at the ClickShare Client log. This log can be enabled by holding shift when starting the Client executable. Look for the lines
"EDSUSBDongleConnection::mpParseDongleMessages". An error code and a short summary of the issue should be logged.
R5900049 CLICKSHARE CSE-800 19/03/2018
The company domain for which you are enrolling, should match with the one defined in your
Active Directory.
Identity of the user account in the Active Directory which will be used by the ClickShare Buttons to
connect to the corporate network.
The corresponding password for the identity that you are using to authenticate on the corporate
network. Per Base Unit each Button will use the same identity and password to connect to the
corporate network.
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
6. CSE-800 Configurator
53