4. CSE-800 Installation
4.5
Rack mounting
About rack mounting
For meeting rooms with a dedicated AV rack, use the included brackets to mount the CSE-800 Base Unit. This integrates the
CSE-800 seamlessly into the room's existing high-end AV installation.
Necessary free space in the rack is 2U.
Necessary tools
•
Torx T10 screwdriver
•
Additional screwdriver that matches the mounting screws
Necessary parts
•
2 mounting brackets with fixation screws (included in the CSE-800 box)
•
2 mounting brackets covers (included in the CSE-800 box)
•
2 rack mounting screws (not included)
How to install
1. Clips the plastic cover (1) on each bracket (2).
2
1
Image 4-3
Mount brackets
2. Place the bracket on fixation holes as indicated and drive in the 4 fixation screws.
3. Repeat for the other side.
4. Insert the antenna extension cables into the provided holes (3) and turn on the antennas (4).
3
Image 4-4
Mount antennas
5. Repeat for the other side.
6. Mount the Base Unit into a rack. Use 2 mounting screws.
Diameter of the mounting holes: 7mm.
18
4
R5900049 CLICKSHARE CSE-800 19/03/2018