Barco ClickShare CSE-800 Installation Manuals
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector Accessories
  5. ClickShare CSE-800
  6. Installation manuals

Barco ClickShare CSE-800 Installation Manuals

Hide thumbs Also See for ClickShare CSE-800:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
ClickShare CSE-800
Installation manual
ENABLING BRIGHT OUTCOMES

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ClickShare CSE-800 and is the answer not in the manual?

Questions and answers

Related Manuals for Barco ClickShare CSE-800

Summary of Contents for Barco ClickShare CSE-800

  • Page 1 ClickShare CSE-800 Installation manual ENABLING BRIGHT OUTCOMES...
  • Page 2 Product revision Software Revision: 1.6 Registered address: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com...
  • Page 3 ClickShare applications (each a “Barco ClickShare Product”). • Term The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare Product, for as long as you operate such Barco ClickShare Product. •...
  • Page 4 • Retention of data Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA. BARCO END USER LICENSE AGREEMENT By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the...
  • Page 5 You may own the carrier on which the Software is provided, but the Software is owned and copyrighted by Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights in the...
  • Page 6 Software. You agree to install any maintenance releases to address bugs or security issues in the Software if the same are being provided to you. Barco will keep you informed as of when earlier versions of the Software are no longer serviced.
  • Page 7 6.4 Remedy. If the breach is not cured within the applicable remedy period (or cannot be cured at all), Barco shall have the option (i) to cause you to procure such additional licenses required as per the actual usage;...
  • Page 8 (especially for components that you provide or control). Barco disclaims any liability for any data not provided by Barco, or any use of the Software outside the intended use as per this License Agreement or an applicable data processing annex.
  • Page 9 ( http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app). Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”).
  • Page 10 PACKAGE VERSION SOURCE SITE xlib_libICE http://xorg.freedesktop.org/releases/individual/lib 1.0.9 xlib_xtrans http://xorg.freedesktop.org/releases/individual/lib 1.3.5 xproto_xproto http://xorg.freedesktop.org/releases/individual/proto 7.0.31 xlib_libX11 http://xorg.freedesktop.org/releases/individual/lib 1.6.4 http://xcb.freedesktop.org/dist libxcb 1.12 http://xcb.freedesktop.org/dist libpthread-stubs xcb-proto http://xcb.freedesktop.org/dist 1.12 xlib_libXau http://xorg.freedesktop.org/releases/individual/lib 1.0.8 xutil_util-macros http://xorg.freedesktop.org/releases/individual/util 1.19.1 xlib_libXdmcp http://xorg.freedesktop.org/releases/individual/lib 1.1.2 xproto_inputproto http://xorg.freedesktop.org/releases/individual/proto 2.3.2 http://xorg.freedesktop.org/releases/individual/proto xproto_kbproto 1.0.7 xproto_xextproto http://xorg.freedesktop.org/releases/individual/proto 7.3.0 xproto_...
  • Page 11 PACKAGE VERSION SOURCE SITE http://collectd.org/files collectd 5.7.1 libgcrypt https://gnupg.org/ftp/gcrypt/libgcrypt 1.7.9 libgpg-error ftp://ftp.gnupg.org/gcrypt/libgpg-error 1.26 http://snapshot.debian.org/archive/debian/20170208T211941Z/pool/ lm-sensors 3.4.0 main/l/lm-sensors https://cdn.kernel.org/pub/software/network/crda crda 3.18 https://github.com/thom311/libnl/releases/download/libnl3_2_27 libnl 3.2.27 https://github.com/cryptodev-linux/cryptodev-linux/archive/ cryptodev-linux 2b29be8ac41414ed19cb4f5d5626d9bd0d7b11a8 https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/ linux 4.4.11 cryptsetup https://cdn.kernel.org/pub/linux/utils/cryptsetup/v1.7 1.7.3 ftp://sources.redhat.com/pub/lvm2/releases 2.02.168 lvm2 http://rpm5.org/files/popt popt 1.16 dhcp http://ftp.isc.org/isc/dhcp/4.3.5 4.3.5 http://download.savannah.gnu.org/releases/dmidecode dmidecode...
  • Page 12 PACKAGE VERSION SOURCE SITE xproto_fixesproto http://xorg.freedesktop.org/releases/individual/proto libvdpau http://people.freedesktop.org/~aplattner/vdpau 1.1.1 xproto_dri2proto http://xorg.freedesktop.org/releases/individual/proto openssl http://www.openssl.org/source 1.0.2m xlib_libXdamage http://xorg.freedesktop.org/releases/individual/lib 1.1.4 xproto_damageproto http://xorg.freedesktop.org/releases/individual/proto 1.2.1 xlib_libxshmfence http://xorg.freedesktop.org/releases/individual/lib xproto_dri3proto http://xorg.freedesktop.org/releases/individual/proto xproto_glproto http://xorg.freedesktop.org/releases/individual/proto 1.4.17 xproto_presentproto http://xorg.freedesktop.org/releases/individual/proto xproto_xf86driproto http://xorg.freedesktop.org/releases/individual/proto 2.1.1 http://downloads.xiph.org/releases/vorbis libvorbis 1.3.5 libogg http://downloads.xiph.org/releases/ogg 1.3.2 opus http://downloads.xiph.org/releases/opus 1.1.4 speex http://downloads.us.xiph.org/releases/speex...
  • Page 13 PACKAGE VERSION SOURCE SITE libglu http://cgit.freedesktop.org/mesa/glu/snapshot 9.0.0 xlib_libXrender http://xorg.freedesktop.org/releases/individual/lib 0.9.10 xproto_renderproto http://xorg.freedesktop.org/releases/individual/proto 0.11.1 gst1-plugins-good https://gstreamer.freedesktop.org/src/gst-plugins-good 1.12.5 http://linuxtv.org/downloads/v4l-utils libv4l 1.12.2 http://freedesktop.org/software/pulseaudio/releases pulseaudio json-c-0.12- json-c https://github.com/json-c/json-c/archive/json-c-0.12-20140410 20140410 http://ftpmirror.gnu.org/libtool libtool 2.4.6 gst1-vaapi https://gstreamer.freedesktop.org/src/gstreamer-vaapi 1.12.5 hostapd http://w1.fi/releases htop http://hisham.hm/htop/releases/2.0.2 2.0.2 iperf http://downloads.sourceforge.net/project/iperf2 2.0.9 iptables http://ftp.netfilter.org/pub/iptables 1.6.1 https://cdn.kernel.org/pub/software/network/iw...
  • Page 14 PACKAGE VERSION SOURCE SITE lighttpd http://download.lighttpd.net/lighttpd/releases-1.4.x 1.4.45 http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware. linux-firmware unknown logrotate https://github.com/logrotate/logrotate/archive/3.11.0 3.11.0 http://pyropus.ca/software/memtester/old-versions memtester 4.3.0 http://mmonit.com/monit/dist monit 5.20.0 http://bitmath.org/code/mtdev mtdev 1.1.4 http://downloads.sourceforge.net/project/netcat/netcat/0.7.1 netcat 0.7.1 nodejs http://nodejs.org/dist/v6.11.5 6.11.5 4.2.8p10 https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2 opkg http://git.yoctoproject.org/git/opkg v0.3.1 opus-tools http://downloads.xiph.org/releases/opus 0.1.9 http://www.php.net/distributions 7.1.7 http://www.sqlite.org/2017 sqlite 3160200 pixman http://xorg.freedesktop.org/releases/individual/lib...
  • Page 15 PACKAGE VERSION SOURCE SITE rsyslog http://rsyslog.com/files/download/rsyslog 8.22.0 http://downloads.sourceforge.net/project/strace/strace/4.15 strace 4.15 tpm-tools http://downloads.sourceforge.net/project/trousers/tpm-tools/1.3.8 1.3.8 http://downloads.sourceforge.net/project/trousers/trousers/0.3.13 trousers 0.3.13 2016j http://www.iana.org/time-zones/repository/releases tzdata ftp://ftp.info-zip.org/pub/infozip/src unzip wireless-regdb http://kernel.org/pub/software/network/wireless-regdb 2011.04.28 wireless_tools 30.pre9 http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux xapp_beforelight http://xorg.freedesktop.org/releases/individual/app 1.0.5 xlib_libXScrnSaver http://xorg.freedesktop.org/releases/individual/lib 1.2.2 xproto_ scrnsaverproto http://xorg.freedesktop.org/releases/individual/proto 1.2.2 xlib_libXaw http://xorg.freedesktop.org/releases/individual/lib 1.0.13 xlib_libXmu http://xorg.freedesktop.org/releases/individual/lib 1.1.2...
  • Page 16 PACKAGE VERSION SOURCE SITE xfont_font-util http://xorg.freedesktop.org/releases/individual/font 1.3.1 xkeyboard-config http://www.x.org/releases/individual/data/xkeyboard-config 2.20 xlib_libXcomposite http://xorg.freedesktop.org/releases/individual/lib 0.4.4 xproto_ compositeproto http://xorg.freedesktop.org/releases/individual/proto 0.4.2 xlib_libXcursor http://xorg.freedesktop.org/releases/individual/lib 1.1.14 xlib_libXfont2 http://xorg.freedesktop.org/releases/individual/lib 2.0.1 xfont_encodings http://xorg.freedesktop.org/releases/individual/font 1.0.4 xlib_libfontenc http://xorg.freedesktop.org/releases/individual/lib 1.1.3 xproto_fontsproto http://xorg.freedesktop.org/releases/individual/proto 2.1.3 http://xorg.freedesktop.org/releases/individual/lib xlib_libXres 1.0.7 xproto_resourceproto 1.2.0 http://xorg.freedesktop.org/releases/individual/proto xlib_libXxf86vm http://xorg.freedesktop.org/releases/individual/lib 1.1.4 xproto_ http://xorg.freedesktop.org/releases/individual/proto...
  • Page 17 PACKAGE VERSION SOURCE SITE grub https://github.com/coreos/grub/releases 2.02-beta2 https://github.com/Rockbox/rockbox/tree/v3.10 rockbox v3.10 libcap https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2 2.25 ftp://ftp.infradead.org/pub/mtd-utils 1.5.2 procps-ng http://downloads.sourceforge.net/project/procps-ng/Production 3.3.12 http://downloads.sourceforge.net/project/strace/strace/4.15 strace 4.15 hidapi https://github.com/signal11/hidapi 0.5.2 splashutils http://dev.gentoo.org/~spock/projects/gensplash/archive 1.5.4.4 git://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git efitools v1.7.0 libresample ftp://ftp.ubuntu.com/ubuntu/pool/universe/libr/libresample 0.1.3 https://mirrors.edge.kernel.org/pub/linux/kernel/v3.x/ linux 3.1.0 EN55032-CISPR32 Class B ITE (Information Technology Equipment) This is a class B product.
  • Page 18 The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
  • Page 19 Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.

  • Page 21: Table Of Contents

    ClickShare Extension Pack.................................49 ClickShare Extension Pack installer ............................49 6 CSE-800 Configurator....................................53 Accessing the Configurator.................................55 ClickShare Configuration Wizard.............................58 On-Screen Language and Text Size ............................61 Meeting room information ................................63 Personalisation, wallpaper ................................64 Personalisation, Personalized wallpaper ..........................65 Manage configuration files................................67 R5900049 /07 ClickShare CSE-800...
  • Page 22 6.32 Support & Updates, Troubleshoot, log settings ......................102 6.33 Factory defaults ....................................103 7 Firmware updates ....................................... 105 Firmware update .................................... 106 8 Troubleshooting......................................107 Troubleshooting list..................................108 9 Environmental information ...................................111 Disposal information..................................112 Rohs compliance.....................................112 Importers contact information ..............................114 Index............................................115 R5900049 /07 ClickShare CSE-800...

  • Page 23: Introduction To The Installation Guide

    Introduction to the Installation Guide R5900049 /07 ClickShare CSE-800...

  • Page 24: Documentation

    Menu items are indicated in italic. • Step related notes, tips, warnings or cautions are printed in italic. • Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon. R5900049 /07 ClickShare CSE-800...

  • Page 25: Specifications

    CSE-800 Specifications R5900049 /07 ClickShare CSE-800...

  • Page 26: About The Cse-800

    GB 2099 • 4x R9861500D01 • wall/ceiling mounting brackets • R9861500T01 • antenna extension cables R9861580NA • R9861580NA • power cable NEMA 5/15 • 4x R9861500D01 • wall/ceiling mounting brackets • R9861500T01 • antenna extension cables R5900049 /07 ClickShare CSE-800...

  • Page 27: Specifications

    ClickShare app Extended desktop Available (depending on your operating system). May require ClickShare Extension Pack. Authentication protocol WPA2-PSK in stand alone mode WPA2-PSK or IEEE 802.1X using the ClickShare Button in network integration mode R5900049 /07 ClickShare CSE-800...

  • Page 28: About The Base Unit

    Front and Top layout of the Base Unit At the front of the Base Unit you can find a standby button and two USB ports. Status LED is mounted at the left of the standby button. R5900049 /07 ClickShare CSE-800...
  • Page 29 To update the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick and plug it into the USB port of the Base Unit. Follow the progress and instructions on the display.
  • Page 30 Fixture point for antenna WiFi 2 Reset HDMI out 1 connector HDMI out 2 connector LAN 1 connector (primary LAN interface) LAN 2 connector (secondary LAN interface) USB connectors 3.0 USB connectors 2.0 Audio connectors Audio connectors R5900049 /07 ClickShare CSE-800...
  • Page 31 Usage of antennas other than the ones provided with the unit are allowed within the restrictions on usage of other antennas defined by local regulations. Barco does not take responsibility for damage or disturbance of other devices that may be caused by using a different antenna. The use of an active power amplifier is not allowed.

  • Page 32: About The Button

    CSE-800 Specifications Bottom layout of the Base Unit The serial number label containing the Barco part number, the revision number, production date (week-year) and the serial number. The product label with the applicable certification logos. The product label contains: •...

  • Page 33: Mobile Device Support

    USB port or computer might be defective. Button label The label at the bottom of the Button contains: • the Barco logo • the Barco part number • the serial number • the revision number • markings for applicable standards •...

  • Page 34: Ports Used By The Clickshare Base Unit

    Auto-update 80; 443 Button Manager 6546 If Proxy settings are enabled in the Configurator for auto-update functionality, additional ports may be used. Google Cast will pick a random UDP port above 32768 to facilitate video streaming R5900049 /07 ClickShare CSE-800...

  • Page 35: Getting Started

    Getting started Overview • Environmental Condition Check • Basic Workflow R5900049 /07 ClickShare CSE-800...

  • Page 36: Environmental Condition Check

    For more information on the different ways to configure CSE-800, see “CSE-800 Configurator”, page 53 For more information on using CSE-800, refer to the CSE-800 User Guide. This manual can be found on Barco's website www.barco.com/clickshare. R5900049 /07 ClickShare CSE-800...

  • Page 37: Installation

    Recommendations about antenna placement and orientation • Video signal connections to the Base Unit • Audio connection • LAN connection • Power connection and switching on WARNING: Bottom surface can become hot. Never put the Base Unit on sensitive surfaces. R5900049 /07 ClickShare CSE-800...

  • Page 38: Installation Methods For The Base Unit

    • 2 mounting screws • 2 plugs • 2 Mounting brackets with fixation screws (included in the CSE-800 box) How to install Mount both brackets to the Base unit as shown. Use for each 4 screws. R5900049 /07 ClickShare CSE-800...
  • Page 39 (stone, wood, plasterboard, ...) you are mounting the Base Unit to. 370,8 Image 4-2: Mounting hole dimensions Install the Base Unit with the brackets on the wall so that the fixation holes matches the holes in the wall. Drive in 2 screws. R5900049 /07 ClickShare CSE-800...

  • Page 40: Ceiling Mounting

    2 mounting brackets with fixation screws (included in the CSE-800 box) • 2 mounting brackets covers (included in the CSE-800 box) • 2 rack mounting screws (not included) How to install Clips the plastic cover (1) on each bracket (2). R5900049 /07 ClickShare CSE-800...

  • Page 41: Recommendations About Antenna Placement And Orientation

    Due to the particular radio pattern of the dipole antennas, the antennas should not be placed just above potential positions of ClickShare users. As a result, the advised position for the antennas is at the side of the meeting room. R5900049 /07 ClickShare CSE-800...

  • Page 42: Video Signal Connections To The Base Unit

    For a single screen setup, HDMI connection should be made between the Base Unit and the display. You can use any HDMI output. Image 4-6: One display For a dual screen setup, 2 HDMI connections should be made between the Base Unit and the displays. R5900049 /07 ClickShare CSE-800...

  • Page 43: Audio Connection

    Base unit. When using the digital output, connect an fibre optical cable with TOSLINK connector into the digital audio output of the Base Unit. Connect the other side to the meeting room's sound system. R5900049 /07 ClickShare CSE-800...

  • Page 44: Lan Connection

    WARNING: Use a power cord which complies to local regulations. If not included in the box, contact your local dealer for a correct power cord. How to connect Plug the power cable in the mains power connector at the back of the Base Unit R5900049 /07 ClickShare CSE-800...
  • Page 45 The standby button has the following functions: • When the system is awake, a short push triggers the system to go into standby mode. • When the system is in standby mode, a short push triggers the system to wake up. R5900049 /07 ClickShare CSE-800...
  • Page 46 CSE-800 Installation R5900049 /07 ClickShare CSE-800...

  • Page 47: Preparing The Buttons

    Preparing the buttons Overview • Pairing • ClickShare Extension Pack • ClickShare Extension Pack installer R5900049 /07 ClickShare CSE-800...

  • Page 48: Pairing

    The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button software. This may take more time. During the pairing and update process, a small status bar is display. R5900049 /07 ClickShare CSE-800...

  • Page 49: Clickshare Extension Pack

    Base Unit without plugging the Buttons to the Base Unit. The Buttons are plugged in to your laptop. For more information about the Button Manager, consult the Button Manager’s user guide which can be downloaded from Barco’s website. 5.2 ClickShare Extension Pack About The ClickShare Extension Pack is a collection of tools to upgrade your ClickShare user experience.
  • Page 50 In this setup, a user or an IT admin can install the ClickShare Extension pack using the Windows command prompt. Following is an example of a silent installation (version numbers are only given as example, always check Barco’s web for the latest version): Launcher only install: msiexec.
  • Page 51 Preparing the buttons The variable to be used is CLICKSHARE_LAUNCHER_CLIENT_PATH. The value should be the path to the client software. R5900049 /07 ClickShare CSE-800...
  • Page 52 Preparing the buttons R5900049 /07 ClickShare CSE-800...

  • Page 53: Configurator

    Status information Base Unit • Date & Time setup, manually • Date & Time setup, time server • Energy savers • Buttons • Blackboard • Firmware Update • Support & Updates, Troubleshoot, log settings • Factory defaults R5900049 /07 ClickShare CSE-800...
  • Page 54 CSE-800 Configurator Within some menus the Configurator is indicated as WebUI. E.g. WebUI password, that is the password to enter the Configurator. R5900049 /07 ClickShare CSE-800...

  • Page 55: Accessing The Configurator

    Note: The Wired IP address is only visible when the Base Unit is connected to the LAN. A login screen appears. Image 6-1: Login screen To change the language of the Configurator, click on the drop down next to the current selected language and select the desired language. R5900049 /07 ClickShare CSE-800...
  • Page 56 Warning: It is strongly recommended to change the default password into a strong password on first use, to prevent that anyone else accessing the configurator can change the settings of the ClickShare Base Unit. See “Security, passwords”, page 94. The configurator opens. R5900049 /07 ClickShare CSE-800...
  • Page 57 Enter the user name 'admin' and the password, read and accept the EULA and click OK. By default the password is set to 'admin'. The configurator opens. To access the Configurator via the Base Unit wireless network On your laptop, connect to the Base Unit wireless network. R5900049 /07 ClickShare CSE-800...

  • Page 58: Clickshare Configuration Wizard

    During the first start up of the Base Unit, the configuration wizard starts up automatically. All basic settings necessary to configure the Base Unit are covered by the configuration wizard. Once the configuration wizard is finished, the Base Unit is ready to be used. R5900049 /07 ClickShare CSE-800...
  • Page 59 CSE-800 Configurator Image 6-4: Configuration wizard To start the wizard, click on Start Configuration. R5900049 /07 ClickShare CSE-800...
  • Page 60 See “Date & Time setup, time server”, page Security Level settings See “Security, security level”, page 93. Password ClickShare Configurator (WebUI) password See “Security, passwords”, page 94. Network Frequency band, channel Wi-Fi passphrase See “WiFi settings”, page 73. R5900049 /07 ClickShare CSE-800...

  • Page 61: On-Screen Language And Text Size

    About the on-screen language. The on-screen language can be set independent of the configurator language. The on-screen text size can be changed between small, medium or large. Language selection Log in to the Configurator Click Personalisation → On-Screen ID. R5900049 /07 ClickShare CSE-800...
  • Page 62 Log in to the Configurator Click Personalisation → On-Screen ID. Click on the drop down box next to On-screen text size and select the desired font size. The following sizes are possible: • Small • Medium • Large R5900049 /07 ClickShare CSE-800...

  • Page 63: Meeting Room Information

    Log in to the Configurator. Click Personalisation → On-screen ID. Check the check box in front of Show meeting room info. Checked: meeting room name, location and welcome message are displayed on-screen when nothing is shared. R5900049 /07 ClickShare CSE-800...

  • Page 64: Personalisation, Wallpaper

    The Wallpaper selection pane is shown. The current selected wallpaper is shown with a red border. Select one of the available wallpapers and click on Save Changes. Note: By default a general Barco CSE-800 wallpaper and a CSE-800 Quick Start Guide wallpapers are available.

  • Page 65: Personalisation, Personalized Wallpaper

    Log in to the Configurator Click Personalisation → Wallpaper. The Wallpaper selection pane is shown. The current selected wallpaper is shown with a red border. Hoover your mouse over the free place and click on Choose image. R5900049 /07 ClickShare CSE-800...
  • Page 66 Click on Save changes to apply the personalized wallpaper The message Successfully applied changes is displayed on top of the page. Change personalized image Click Personalisation → Wallpaper. Hoover your mouse over the current personalized image and click Change image. R5900049 /07 ClickShare CSE-800...

  • Page 67: Manage Configuration Files

    A full backup can be downloaded but cannot be used to duplicate configuration settings to other Base units. Therefore, it is possible to download a Portable version. This portable version can be uploaded via the upload R5900049 /07 ClickShare CSE-800...
  • Page 68 Base Unit of the same model. When uploading a config file, the history of software updates and paired Buttons is lost. Paired buttons will however remain functional if the Base Unit has not changed from SSID or wireless password. R5900049 /07 ClickShare CSE-800...

  • Page 69: Display Setup, Output

    The position can be set to 1 or 2. Default value, for HDMI1, ClickShare position is set to 1, the content will be displayed on display 1 for HDMi2, ClickShare position is set to 2, the content will be displayed on display 2 R5900049 /07 ClickShare CSE-800...
  • Page 70 The content of multiple users will be shown on one screen. The content of that first screen will be duplicated on the second screen. Display mode selection Log in to the Configurator. Click Display & Audio → Outputs. R5900049 /07 ClickShare CSE-800...

  • Page 71: Audio Settings

    The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the Buttons must be re-paired before the setting becomes active. How to change Log in to the Configurator. Click Display & Audio → Display & Audio → Output. R5900049 /07 ClickShare CSE-800...

  • Page 72: Display Setup, Inputs

    The name of the source is displayed next to Source Name but can be changed. This source name is displayed on the screen. Each input can be enabled or disabled. How to change the source name Log in to the Configurator. Click Display & Audio → Inputs. R5900049 /07 ClickShare CSE-800...

  • Page 73: Wifi Settings

    The transmission power of the wireless signal can be reduced. When reducing the transmission power, it is reduced for both frequencies. Changing the IP address will require a repairing of the Buttons used with this Base Unit. R5900049 /07 ClickShare CSE-800...
  • Page 74 Select the channel for the selected frequency. Click on the drop down box and selecting the correct band. If Concurrent is selected you have to select the channel for each frequency. R5900049 /07 ClickShare CSE-800...
  • Page 75 Note: Changing that setting will require a repairing of the buttons. ClickShare Configurator (WebUI) access via Wi-Fi To allow access to the configurator via Wi-Fi, check the check box in front of WebUI available via Wi-Fi. Checked: Configurator accessible via Wi-Fi. R5900049 /07 ClickShare CSE-800...

  • Page 76: Lan Settings

    IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network. Hostname Log in to the Configurator. Click Wi-Fi & Network → LAN Settings. R5900049 /07 ClickShare CSE-800...
  • Page 77 Click in the Default Gateway input fields and fill out the 4 octets. Set the Default-Gateway to the IP-Address of the router (MUST be on the local subnet!). Note: This must NOT be 0.0.0.0. If there is no router on the local subnet then just set this field to any IP-Address on the subnet. R5900049 /07 ClickShare CSE-800...

  • Page 78: Network Integration, Activation

    At this point, the Base Unit needs to be connected to the corporate network via the wired Ethernet interface so that the Buttons and mobile devices can share their content on the Base Unit. R5900049 /07 ClickShare CSE-800...
  • Page 79 Network Once you enable the corporate network, the internal Wi-Fi access point of the ClickShare Base Unit is disabled. Make sure your Base Unit is connected to the corporate network via its wired Ethernet interface. Firewall R5900049 /07 ClickShare CSE-800...
  • Page 80 The Corporate Network Integration feature is provided “AS IS”, without any liability or obligation of or on behalf of Barco. Barco cannot guarantee that the feature works in your corporate network. The reliability, quality and stability when sharing using the Corporate Network Integration depends on your network infrastructure.

  • Page 81: Network Integration, Eap-Tls Security Mode

    EAP-TLS is supported via SCEP or manual certificate upload. How to start up for EAP-TLS Log in to the Configurator. Click WiFi & Network → Network integration. Click on Change configuraton. Select the radio button next to EAP-TLS and click Next. R5900049 /07 ClickShare CSE-800...
  • Page 82 Windows Server and its active directory (AD) to manage users and devices our SCEP implementation is specifically targeted at the Network Device Enrolment Service (NDES) which is part of Windows Server 2008 R2 and Windows Server 2012. No other SCEP server implementations are supported. R5900049 /07 ClickShare CSE-800...
  • Page 83 Client Certificate issued by your CA and this user account. Corporate SSID The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect. NDES White Paper: http://social.technet.microsoft.com/wiki/contents/articles/9063.network-device-enrollment-service-ndes-in- active-directory-certificate-services-ad-cs-en-us.aspx R5900049 /07 ClickShare CSE-800...
  • Page 84 Button please have a look at the ClickShare Client log. This log can be enabled by holding the Shift key when starting the Client executable. Look for the lines “EDSUSBDongleConnection:: mpParseDongleMessages”. An error code and a short summary of the issue should be logged. R5900049 /07 ClickShare CSE-800...

  • Page 85: Network Integration, Eap-Ttls Security Mode

    Click WiFi & Network → Network integration. Click on Change configuraton. Select the radio button next to EAP-TTLS and click Next. Image 6-31: Network integration, EAP-TTLS selected The EAP-TTLS mode window opens. Image 6-32 Necessary Data to continue: R5900049 /07 ClickShare CSE-800...

  • Page 86: Network Integration, Peap Security Mode

    Log in to the Configurator. Click WiFi & Network → Network integration. Click on Change configuraton. Select the radio button next to PEAP and click Next. Image 6-33: Network integration, PEAP selected The PEAP mode window opens. R5900049 /07 ClickShare CSE-800...

  • Page 87: Network Integration, Wpa2-Psk Security Mode

    AP (access point) is encrypted using a 256 bit key. How to start up for WPA2-PSK Log in to the Configurator. Click WiFi & Network → Network integration. Click on Change configuraton. Select the radio button next to WPA2-PSK and click Next. R5900049 /07 ClickShare CSE-800...

  • Page 88: Services, Mobile Devices

    This function enables the possibility to connect with a mobile device using the ClickShare app to connect to the Base Unit. It is enabled by default. When the Base Unit is integrated in the corporate network, it may be required to disable content sharing from the ClickShar app. R5900049 /07 ClickShare CSE-800...
  • Page 89 Base Unit. Then AirPlay must be activated on your device. For more information about activating AirPlay, consult the user guide of your device. The supported versions of AirPlay can be found on Barco’s website, www.barco.com\clickshare. The support of non-released version of these protocols cannot be guaranteed by Barco.

  • Page 90: Service, Clickshare Api, Remote Control Via Api

    Check the check box in front of Remote control via API to enable this function. Checked: remote control via API is allowed. A password can be used to protect the access. Not checked: no remote control via API allowed. R5900049 /07 ClickShare CSE-800...

  • Page 91: Cmgs Server Integration

    Base Unit to pair it. This functionality makes it easy to use any Button with any Base Unit. Before you can use the ClickShare Button Manager a password must be configured on each Base Unit. How to setup Log in to the Configurator. Click WiFi & Network → Services. Scroll to Remote Button Pairing. R5900049 /07 ClickShare CSE-800...

  • Page 92: Security, Compatibility

    When changing the security level to 2 or 3, a warning message will be display : “This change requires an update of the Button security settings. Please re-pair the Buttons with the Base Unit to transfer the change in security settings.” How to activate Log in to the Configurator. Click Security → Compatibility. R5900049 /07 ClickShare CSE-800...

  • Page 93: Security, Security Level

    Level 3 : this level is used for organizations that have extremely strict requirements with regards to security. Level 3 contains the level 2 security extended with blocking of mobile apps, downgrading firmware not possible and no wireless access to the Configurator (WebUI). R5900049 /07 ClickShare CSE-800...

  • Page 94: Security, Passwords

    That password can be changed at any time to protect the ClickShare Configuration settings. The ClickShare API access is password protected. That password can be changed in the ClickShare Configurator. Changing the ClickShare Configurator (WebUI) password Log in to the Configurator. Click Security → Passwords. R5900049 /07 ClickShare CSE-800...

  • Page 95: Status Information Base Unit

    Serial number • Firmware version • First used • Last used • Current uptime: time since last startup • Lifetime uptime: time used since first startup • Overall status Base Unit restart Log in to the Configurator. R5900049 /07 ClickShare CSE-800...

  • Page 96: Date & Time Setup, Manually

    About Date & Time setup The date and time can be set manually using the time zone indication or using at least one NTP servers. How to setup Log in to the Configurator. Click System → Date & Time. R5900049 /07 ClickShare CSE-800...
  • Page 97 To change the time, click in the time field next to Time. A window with 3 scroll counters open. Image 6-47: Time setup Click on the up down arrow of each scroll counter until the correct hour, minutes and seconds are obtained. Click Save changes to apply. R5900049 /07 ClickShare CSE-800...

  • Page 98: Date & Time Setup, Time Server

    The Base Unit's LEDs will be breathing white to indicate the ECO standby mode. Power consumption in Eco standby: 2.6W The Base Unit will wake up with one of the following actions: • Button connecting with the Base Unit • Press the standby button on the Base Unit R5900049 /07 ClickShare CSE-800...

  • Page 99: Buttons

    It is possible to update the software of the Buttons over Wi-Fi. All Buttons used with the Base Unit are indicated in the Buttons List. The list contains the state, the signal strength, the serial number, the firmware version, the number of connections and last connection. R5900049 /07 ClickShare CSE-800...

  • Page 100: Blackboard

    Log in to the Configurator. Click System → Blackboard. Image 6-51: Save annotations Check or uncheck the check box in front of Allow saving annotations to connected clients and USB sticks. Checked: annotations on the blackboard can be saved. R5900049 /07 ClickShare CSE-800...

  • Page 101: Firmware Update

    Browse to the file with the new firmware and click Open to start the upload. Note: This should be an .enc file. You might have to unzip the file downloaded from Barco's website. Note: Updating the software to the Base Unit takes several minutes. Progress can be followed on the meeting room display.

  • Page 102: Support & Updates, Troubleshoot, Log Settings

    Management Suite, the firmware can be upgrade via this Management Suite. For more information on upgrading firmware via the Collaboration Management Suite, consult the Collaboration Management Suite’s user guide which can be downloaded from Barco’s website ( www.barco.com/clickshare). • Download the firmware on a USB stick and plug in this USB in your device. For more information, see “Firmware update”, page 106...

  • Page 103: Factory Defaults

    Debug logging and remote logging are disabled. Restoring to factory defaults will require a repairing of the Buttons used with this Base Unit. How to restore factory defaults Log in to the Configurator. Click Support & Updates → Troubleshoot. R5900049 /07 ClickShare CSE-800...
  • Page 104 If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind. When yes is clicked, the system starts a reboot. Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while pressing the reset button. R5900049 /07 ClickShare CSE-800...

  • Page 105: Firmware Updates

    Firmware updates R5900049 /07 ClickShare CSE-800...

  • Page 106: Firmware Update

    Barco’s website ( www.barco.com/clickshare). To update the Base Unit software by copying the software on a USB stick Download the latest version of the firmware from Barco's website, www.barco.com/clickshare. Click on Support and select the update firmware button of your device type.

  • Page 107: Troubleshooting

    Troubleshooting R5900049 /07 ClickShare CSE-800...

  • Page 108: Troubleshooting List

    If possible, change the USB port might be blocked as a policy on the laptop. company policy. • USB port settings on the laptop might limit the usage of high power USB devices when on battery power. R5900049 /07 ClickShare CSE-800...
  • Page 109 ClickShare tries to restore the display and the LEDs on the button lost. connection automatically. If it fails, are blinking white the LEDs on the Button start blinking red. Unplug the button from your laptop and try a new button. R5900049 /07 ClickShare CSE-800...
  • Page 110 IP address is not within your LAN Unit range. DHCP is not enabled. No WiFi connection with Base Unit SSID not correct Enter the correct SSID Locate the problem you are experiencing in the table below and apply the solution. R5900049 /07 ClickShare CSE-800...

  • Page 111: Environmental Information

    Environmental information R5900049 /07 ClickShare CSE-800...

  • Page 112: Disposal Information

    Electronic Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
  • Page 113 Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products” of Chinese Mainland.

  • Page 114: Importers Contact Information

    Note 3：The “—” indicates that the restricted substance corresponds to the exemption. 9.3 Importers contact information Contact To find your local importer, contact Barco directly or one of Barco's regional offices via the contact information given on Barco's web site, www.barco.com. R5900049 /07...

  • Page 115: Index

    Inputs 72 Blackboard 100 Output 69 Button Documentation 24 About 32 Pairing 48 Prepare 47 Button pairing EAP-TLS 81 Remote 91 EAP-TTLS 85 Buttons 99 Eco standby 98 Compatibility 92 Energy savers 98 Environment condition check 36 R5900049 /07 ClickShare CSE-800...
  • Page 116 Meeting room name 63 Base unit 38 Mobile Device Text size Support 33 On-screen 61 Mobile devices 88 Time out screen 98 Troubleshoot Log settings 102 Troubleshooting 107 Troubleshooting list 108 Network integration Activation 78 EAP-TLS 81 R5900049 /07 ClickShare CSE-800...
  • Page 117 Index Update Firmware 106 Base unit 101 Button 101 Upload configuration 67 Wall mounting Base unit 38 Wallpaper 64 Personalized 65 WebUI password 94 Welcome text Meeting room 63 WiFi settings 73 WPA2-PSK 87 R5900049 /07 ClickShare CSE-800...
  • Page 118 R5900049 /07 | 2018-12-06 Registered address: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com...

This manual is also suitable for:

Clickshare cse-200

Table of Contents