About The Base Unit - Barco ClickShare CSE-800 Installation Manual

Humidity
Anti-theft system
Certifications
Warranty
Button
Weight
Frequency band
Wireless transmission protocol
Authentication protocol
Dimensions (HxWxD)
Power consumption
2.3

About the Base Unit

Base Unit
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and
the sound of the meeting room's audio system.
The Base Unit can be installed in two different ways.
Front and Top layout of the Base Unit
At the front of the Base Unit you can find a standby button and two USB ports. Status LED is mounted at the left of the standby
button.
1
Image 2-2
R5900049 CLICKSHARE CSE-800 19/03/2018
Storage: 0 to 90% relative humidity, non-condensing
Operation: 0 to 85% relative humidity, non-condensing
Kensington lock
FCC/CE
3 years standard
Possible to extend to 5 years
75 g/0.165 lb
2.4 GHZ and 5 GHz
IEEE 802.11 a/b/g/n
WPA2-PSK in stand alone mode
WPA2-PSK or IEEE 802.1X in network integration mode
16.3 mm x 59.3 mm x 162.52 mm / 0.64" x 2.335" x 6.398"
Powered over USB
5V DC
350mA Typical
500mA Maximum
2
2. CSE-800 Specifications
7