4. CSE-800 INSTALLATION
Overview
•
Installation methods for the Base unit
•
Table mounting
•
Wall mounting
•
Ceiling mounting
•
Rack mounting
•
Recommendations about antenna placement and orientation
•
Video signal connections to the Base Unit
•
Audio connection
•
LAN connection
•
Power connection and switching on
W
ARNING
4.1
Installation methods for the Base unit
For optimal performance, install the Base Unit close to the display and avoid obstacles between the Base Unit
and the Buttons. Do not block the fan inlets and outlets of the Base Unit!
Introduction to the installation methods
The base unit can be installed in different ways in a meeting room:
•
Table mounted
•
Wall mounted
•
Ceiling mounted
•
Rack mounted
The antennas are removable. They can be fixed to the Base Unit depending on the way the Base Unit is installed in the room. The
antennas can rotate for better wireless connection.
Using extension cables for the antennas is allowed, but this can reduce the performance.
4.2
Table mounting
Overview
Put the Base Unit directly on the meeting room table.
The total weight of the Base Unit is 2.2 kg.
4.3
Wall mounting
About wall mounting
Use the mounting brackets, inserted in the CSE-800 box, to mount the Base unit on the wall.
R5900049 CLICKSHARE CSE-800 19/03/2018
:
Bottom surface can become hot. Never put the Base Unit on sensitive surfaces.
4. CSE-800 Installation
15