Energy Savers - Barco ClickShare CSE-800 Installation Manual

6. CSE-800 Configurator
Image 6-47
Time server setup
The current time is indicated next to Current time.
3. Check the radio button next Use NTP.
4. Enter a NTP server address next to NTP servers. Enter the IP address or server name.
Note: Multiple servers (maximum 5) can be added, separated by a comma.
5. Click Save changes to apply.
A synchronization with the NTP server takes place. The status field indicates the progress.

6.27 Energy savers

About standby
Standby after (minutes): If there is no client connection detected during the standby timeout period, the Base Unit will enter the
selected standby mode.
Default setting: Time to standby: 10 min, the Base Unit will enter the Eco standby mode.
Eco mode
When the Base Unit enters ECO standby mode, it will disable the HDMI output signal and go in low power mode. The Base Unit's
LEDs will be breathing white to indicate the ECO standby mode.
Power consumption in Eco standby: 2.6W
The Base Unit will wake up with one of the following actions:
• Button connecting with the Base Unit
• Press the standby button on the Base Unit
• "Wake up" signal over the network
• Pairing a Button on the Base Unit's USB port
• Detection of display hot plug
Standby mode
When the Base Unit goes in standby mode, it will shut down all processes, including the Wi-Fi access point and the secondary LAN
connection.
When there is an active network connected to the Base Unit's primary LAN interface and Corporate network is enabled, the primary
LAN interface will remain active and the Base Unit's LEDs will be breathing white to indicate this standby mode. Otherwise, The
Base Unit's LEDs will be dark.
Power consumption in Deep standby: 0.4W
The Base Unit will wake up when the standby button on the Base Unit is pressed, or
when the primary LAN interface remains active: a detection of HDMI input hot plug or button or app connecting with the Base Unit's
primary LAN interface.
How to change the display timeout and standby mode
1. Log in to the Configurator.
2. Click System → Energy Savers.
64 R5900049 CLICKSHARE CSE-800 19/03/2018