Specifications; Standard Specifications; External Input/Output Functions - GRAPHTEC midi LOGGER GL240 Quick Start Manual

Standard Specifications

Item
Number of analog channels 10 channels
External input and
output functions
PC interface
Built-in memory device
Number of analog channel
Back-up functions
Clock accuracy
(ambient temperature 23°C)
Operating environment
Power supply
Power consumption
External dimensions
(approximate)
Weight (approximate)
Vibration-tested conditions

External Input/Output Functions

Item
Input specifications
(pulse/logic, trigger/
External sampling)
Alarm output

specifications

Specifications
Trigger input or External sample pulse (1ch),
Logic input (4ch) or Pulse input (4ch), Alarm output (4ch)
USB 2.0 (HighSpeed supported) ,
Wireless LAN (Required to install optional module.)
Internal memory (SD1) : approx. 4GB
SD CARD2 slot: 1 (Compatible with SDHC, up to approx. 32GByte memory available)
* Possible to save up to 2GB for one file
10ms/1ch MAX
10/20/50/100/125/200/250/500ms, 1/2/5/10/20/30sec
1/2/5/10/20/30min, 1hour, External
* In the case of 50 ms or less, available settings vary depending on the input settings and
number of CHs to be measured.
Setup parameters: EEPROM/Clock: Lithium battery
±0.002% (approx. 50 seconds per month)
0 to 45°C, 5 to 85%RH
(0 to 40°C when operated in batteries/15 to 35°C when battery is charging)
AC adapter : 100 to 240 VAC, 50 to 60 Hz
DC input : 8.5 to 24 VDC (26.4 V max.)
Battery pack (option) : 7.2 VDC (2900 mAh)
AC power consumption
No Condition
1 When the LCD is on
When the screen saver is operating
2
DC current consumption
No
1 When the LCD is on
+24 V
2 When the screen saver is operating
3 When the LCD is on
+12 V
4 When the screen saver is operating
5 When the LCD is on
+8.5 V
6 When the screen saver is operating
[W×D×H] :188×117×42 mm
500 g
* AC adapter and battery are not included.
Equivalent to automobile parts Type 1 category A classification
Maximum input voltage : 0 to +24V (single-ended ground input)
Input threshold voltage : approximate +2.5 V
Hysteresis : approximate 0.5 V (+2.5 V to +3 V)
Output format : Open collector output (5 V, 10 k pull-up resistance)
* Refer to the User's Manual in the supplied CD-ROM for more information.
Description
* when using the AC adapter provided as a standard accessory
AC100 V
AC240 V
AC100 V
AC240 V
* Normal condition: LCD brightness is set to MAX.
Condition
Description
Normal During recharging battery
16 VA 36 VA
24 VA 52 VA
15 VA 35 VA
22 VA 51 VA
Normal During recharging battery
0.24 A 0.61 A
0.22 A 0.59 A
0.42 A Recharging battery
is not possible.
0.37 A
Recharging battery
0.58 A
is not possible.
0.53 A
19