Data Replay : How To Replay Recorded Data - GRAPHTEC GL840 Quick Start Up Manual

4. Data Replay : How to Replay Recorded Data

When recording has been completed data is automatically replayed.
The automatically replayed data is the data recorded to the internal memory (SD1)
which has been set as the data capture destination.
Push the [QUIT] key to end the data replay operation.
GL840 has many additional features. Please refer to the following pages for details.
1. Selecting a file to replay
(1) Push the [REVIEW] key.
(2) Select data to be reviewed, move the cursor to the [OK] button and
[ENTER] key.
2. Replay screen
1. Scroll bar
5. Cursor
1. Scroll bar
2. Level display area
3. Quick settings
4. Time display
5. Cursor
Push the [QUIT] key to end the data replay operation.
A confirmation message is displayed. Push the [ENTER] key.
Data replay ends, and the GL840 goes into the Free Running mode.
2. Level display area
3. Quick settings
: Displays the position within the whole data and the
display width.
: Displays the levels of A and B cursors and the
difference between the A and B values.
: Use the keys to search the previous or next
level. (Note: Make search settings in the menu.)
: Displays the sampling interval and the time of the
cursor.
: Displays the cursor. (Note: Push the CURSOR key
to switch between A and B cursors.)
Move the cursor using the
keys.
Desired level values and time can be checked by
moving the cursor.
4. Time display
keys or the
16