Rfid Menu Overview - Printronix T6000 Reference Manual

RFID Menu Overview

The RFID section is found by selecting the RFID icon from the second page of the Settings menu as shown
in Figure 2.
From there, the RFID section is structured into four submenus as shown in Figure 3 and Figure 4:
•
The Control submenu is used to configure how the RFID system will operate with respect to the en-
coder writing, reading, and verifying. Those menus are described starting on page 16.
•
The Custom Tag submenu is used to configure the system when support of custom RFID tags is re-
quired. Those menus are described starting on page 20.
RFID
Custom Tag
Continued
•
The Diagnostics submenu is used to run test procedures to help determine the accuracy and trou-
bleshoot the RFID system. Those menus are described starting on page 24.
14
Figure 2 RFID Icon Location
Figure 3 RFID Control, Custom Tag Submenus
RFID
Control
Active
• Aln9740
* Enable
ShortPitch
AutoID
Mgr Rpt
* Disable * 0.0 inches
Custom Write
Active Power
* Duplicate
Write
Tries
Start
1
Position
* 0.0 inches
* 3.0 inches
1
Inches or Millimeters, depending on SYSTEM > Control > Media Units.
2
Default depends on type of RFID encoder installed.
Tag Error Label
Type Handling Retry
* Overstrike * 10
Tag Auto Higgs 3
1
Position Write PC EPC Len
* Enable
* 96
Read Min
2 2
Power Power
* 1
Tag
Read
Class
Tries
* 9 * Gen 2
* Infinite
Tag EPC
Scan
1 Length Address
Length
*0
* 30
Max Retry Auto
Error Retry
* Enable
* 2
Overstrike
EPC Write
Style
Control
* Data Length * Grid
Max USR
USR
Power Size
Address
* 20 * 3
* 64
Block TID
TID
Size Size
Address
* 32
* 12
* 0