Max Retry Error; Auto Retry; Overstrike Style; Epc Write Ctrl - Printronix T6000 Reference Manual

Max Retry Error

This menu item determines if errors are declared when the Label Retry count
is exceeded.
Disable
Enable
Factory Default

Auto Retry

This menu item selects the number of automatic (internal) retries that the
printer will attempt on the same tag before taking action per the menu Error
Handling.
Minimum
Maximum
Factory Default

Overstrike Style

This menu item selects the style of the overstrike pattern.
Grid
Error Type Msg
Factory Default
IMPORTANT

EPC Write Ctrl

This option controls how the printer encodes the RFID tag EPC field.
Data Length
Full EPC Length
Factory Default
IMPORTANT
18
RFID > Control > Max Retry Error
Errors are not declared and the print content for the
current label is discarded.
Errors are declared when the tag cannot be pro-
grammed within the Label Retry count.
Enable
RFID > Control > Auto Retry
1
9
2
RFID > Control > Overstrike Style
A grid pattern prints when it overstrikes. On the T6000,
this will be a partial grid pattern.
An error message prints that indicates which error
occurred per Table 5.
Grid
If you are using a validator, set the RFID Overstrike
Style different than VALIDATOR > Control > Over-
strike Style. This will help you differentiate errors.
RFID > Control > EPC Write Ctrl
Only the amount of data provided in the application is
encoded.
The maximum EPC length for the particular tag type in
use is written to the tag (padded with zeroes if neces-
sary).
Data Length
If Auto Write PC is enabled, the PC field encodes
information about the length of the EPC written.