Supported Uhf Gen2 Tag Types; Alien Tags - Printronix T6000 Reference Manual

Once the RFID is installed, the RFID section under Settings can be selected and the RFID configured.
However, it may not be enabled by default:
•
If the printer is powered up with the menu Configs > Control > Power-Up Config set to Factory, the RFID
> Control > Validator Active will be set to "Enable" automatically.
•
If the printer is powered up with Configs > Control > Power-Up Config to something other than Factory,
the RFID > Control > Validator Active is set to "Disable".
To enable the RFID feature, change the menu RFID > Control > RFID Active to "Enable" and save the
configuration as described in the Administrator's Manual.

Supported UHF Gen2 Tag Types

Table 1 through Table 3 lists supported tag types in the order they appear in the menu (alphabetical order).
Other types may be added in the future.
NOTE: For tag type specifications, go to www.PrintronixAutoID.com/rfid-inlay-placement/. Select
the desired Printronix specification for more information.

Alien Tags

Menu Text
Aln9630 ShortPitch
Aln9630 OnPitch
Aln9640 ShortPitch
Aln9640 OnPitch
Aln9662 ShortPitch
Aln9715 ShortPitch
Aln9715 OnPitch
Aln9720 ShortPitch
Aln9728 ShortPitch
Aln9730 ShortPitch
Figure 1 RFID Icon
Table 1 Alien UHF Gen2 Tag Types
EPC User
TID
Bits Bits
See Table 4 E2003412
See Table 4 E2003412
See Table 4 E2003412
See Table 4 E2003412
See Table 4 E2003412
128 128 E2003414
128 128 E2003414
128 128 E2003414
128 128 E2003414
128 128 E2003414
Antenna
Silicon
Position
Alien Higgs 3
Alien Higgs 3
Alien Higgs 3
Alien Higgs 3
Alien Higgs 3
Alien Higgs 4
Alien Higgs 4
Alien Higgs 4
Alien Higgs 4
Alien Higgs 4
PTX Spec
5 184237
5 184237
7 183260
7 183260
5 183955
5 185219
1 ??
5 184964
5 184974
5 184237
11