Tag Class; Read Tries; Write Tries; Start Position - Printronix T6000 Reference Manual

Tag Class

This menu item selects the class of the custom tag.
Class 1
Gen 2
Class 0
Class 0+
Class 1.19
Class Zuma
Factory Default

Read Tries

This menu item selects how many times the RFID encoder will try each read
command.
Minimum
Maximum
Factory Default

Write Tries

This menu item selects how many times the RFID encoder will try each write
command.
Minimum
Maximum
Factory Default

Start Position

This menu item determines where on the label the RFID calibration will
begin. By default, the calibration procedure will start at the beginning of the
label (0.0 inches). To make the calibration work faster, change this value to
force the calibration to begin after the beginning of the label.
Minimum
Maximum
Factory Default
IMPORTANT
RFID > Custom Tag > Tag Class
Read/Write tag.
Read/Write tag.
Read only
Read/Write tag.
Read/Write tag.
Read/Write tag.
Gen 2
RFID > Custom Tag > Read Tries
1
10 or Infinite
Infinite
RFID > Custom Tag > Write Tries
1
10
9
RFID > Custom Tag > Start Position
0.0 inches
5.0 inches
0.0 inches
The units display in inches or millimeters, depend-
ing on SYSTEM > Control > Media Units.
23