Stgl Rfid Commands; Rfid Write - Printronix T6000 Reference Manual

^RFW,A^FDnewdata^FS
^RZ1234ABCD,E,L^FS
^XZ
Example 6
This example shows the access of 240 bits EPC and 512 bits USR.
^XA
^RZ31323334,K,W
^RZ1234ABCD,K,L
^RFW,H,1,30,1^FD0102030405060708091011121314 15161718192021222324252627282930^FS
^RFR,H,1,30,1^FN0^FS^HV0,128,#EPC240:^FS
^RZ1234ABCD,E,L
^RFW,H,0,64,3^FD010203040506070809101112131415161718192021222324252627282930313233343
53637383940414243444546474849505152535455565758596061626364^FS
^RFR,H,0,64,3^FN1^FS^HV1,128,#USR512:^FS
^RZ1234ABCD,U,L
^XZ
^XA
^RZ1234ABCD,A,U
^RZ1234ABCD,K,U
^RZ1234ABCD,U,U
^RZ1234ABCD,E,U
^FN2^RFP,H,A^FS
^FN3^RFP,H,K^FS
^HV2,16,#ACS=^FS
^HV3,16,#KIL=^FS
^XZ

STGL RFID Commands

RFID Write

Purpose This command specifies data to be written into RFID tags.
Format <ESC>RK 1,a,b,D16,c..c
^HV
a
This "a" parameter is ignored for STGL. The error handling for all RFID commands
IMPORTANT
on all supported emulations is set according to the menus on the front panel. Using
the RFID menu, the user can set the error handling, number of retries, and tag type.
b
D
16 or 24
c..c
Host Verification command.
RFID tag Error Ignore. 0 = Disable (default when value is omitted),
1 = Enabled, 2 to 9 = Auto retry on tag error.
Write Protector Designation. Valid range is 0 to 1. 0 = Fixed (de-
fault).
Write Protector Designation. Valid range is 0 to 1. 0 = Fixed (de-
fault).
Specification of Writing Data Size. Valid data size is 16 or 24
characters.
EPC data (fixed at 16 characters). Valid range is 0 to 9 or A to F
49