Write Epc With 1S; Write Epc With 2S; Statistics Submenu; Tag Write Count - Printronix T6000 Reference Manual

Write EPC with 1s

This executable menu writes all ones to the tag in range of the internal RFID
coupler. It is primarily intended for development verification by checking that
the system is working.
IMPORTANT

Write EPC with 2s

This executable menu writes all twos to the tag in range of the internal RFID
coupler. It is primarily intended for development verification by checking that
the system is working.
IMPORTANT

Statistics Submenu

The following items are in the RFID > Statistics section and used to store statistics about the RFID system
activities. The statistics can be reset by executing the menu Clear Tag Stats operation within this section.

Tag Write Count

This menu item displays on the LCD the number of tags attempted to be
written since the last Clear Tag Stat operation has been initiated.

Tag Failed Count

This menu item displays on the LCD the number of failed tag write attempts
since the last Clear Tag Stat operation has been initiated.

Tag Void Count

This menu item always displays 0 unless the RFID encoder is used with an
attached online data validator. When used with a validator, Tag Void Cnt
represents how many valid RFID tags were overstruck due to bad bar code
scanning. Refer to the Online Data Validator User's Manual.

Tag Read Count

This menu item displays the number of tags read since the last Clear Tag
Stat operation.
26
RFID > Diagnostics > Write EPC with 1s
This menu item does not position the RFID tag
over the coupler. Make sure to position the tag
over the coupler to receive an accurate writing.
RFID > Diagnostics > Write EPC with 2s
This menu item does not position the RFID tag
over the coupler. Make sure to position the tag
over the coupler to receive an accurate writing.
RFID > Statistics > Tag Write Count
RFID > Statistics > Tag Failed Count
RFID > Statistics > Tag Void Count
RFID > Statistics > Tag Read Count