Read Power; Min Power; Max Power; Usr Size - Printronix T6000 Reference Manual

Read Power

This menu item selects the read power level to be used in the RFID encoder.
1 is the lowest power level setting, and 20 is the highest.
Minimum
Maximum
Factory Default

Min Power

The menu item determines the minimum power level that the calibration
procedure will use when attempting to find the ideal power level. To make the
calibration work faster, increase this value to exclude the lower power levels.
Minimum
Maximum
Factory Default

Max Power

The menu item determines the maximum power level that the calibration
procedure will use when attempting to find the ideal power level. To make the
calibration work faster, decrease this value to exclude the higher power lev-
els.
Minimum
Maximum
Factory Default

USR Size

This menu item selects the size of the USR block within the RFID tag
memory.
Minimum
Maximum
Factory Default
RFID > Custom Tag > Read Power
1
25
Depends on the type of RFID encoder installed.
RFID > Custom Tag > Min Power
1
25
1
RFID > Custom Tag > Max Power
1
25
20
RFID > Custom Tag > USR Size
0
64
64
21